AMTAK Clear Coat Epoxy

Clear coat epoxy was rated the #1 finish in a recent independent test of 10 leading brands!
Clear coat was first in every category. Ease of use, non yellowing, clarity, curing time, pot life, and bubbling to name a few. Clear Coat Rod Epoxy - Less Yellowing - Thinner consistency than the other leading brand so there's less bubbling - Dries in 3 to 4 hours - A one year shelf life - UV protected, a big plus since it inhibits fading and discoloration - Prevents coating breakdown so you’ll have minimized your chances of chipping, cracking & peeling - The thinner more flexible Formula Two is engineered with low viscosity which is most suited for the ultimate test , fly rods - Flexibility protects against splitting at the guide foot - Crystal clear to begin with and stays that way after application - Color preserver - Packaged in the sizes you want -Waterbased - Better consistency, penetrates much deeper than other leading brands - A lot better fill it needs no more than two coats - Its consistency lets you go across the threads without bubbling - The Reel Seat Epoxy cures to a solid in 8 hours & is fully cured in 24 hours at room temperature. Used with confidence by rod manufacturers for IGFA 130 lb. class rods. Our customers love it. The Epoxy Glue Fast Set cures to a solid in 7 to 10 minutes. The regular Epoxy Glue cures to a Solid in about 8 hours. If you don’t have the same results return the unused portion for credit.